AIR TURBINE LINE
Wind Volt Technology     |     home
back to  Wind Turbines
AIR TURBINE LINE
            
                AIR 403                             AIR MARINE                            AIR INDUSTRIAL                      
 AIR Wind Modules


In 1996, the introduction of the AIR-303 revolutionized the battery charging wind turbine market. People quickly began to see that wind was as easy to use as Photovoltaics.
And now, over 30,000 turbines later, the new 403 has once again rewritten the history books as it became the best selling wind turbine in the world. Still priced about the same as a photovoltaic module, an AIR is capable of producing more than seven times the energy!
Maintenance-free performance, easy installation, and high output make AIR ideal for virtually any remote battery charging application.
The AIR is designed to be used in combination with photovoltaic modules to balance system energy output during times of seasonal fluctuations.
No room for a tower? AIR's compact design make it ideal for roof top mounting. Check out the Tower Kits Page for more information.

 AIR 403
Specifications
Rotor Diameter:
46" (1.14 meters)
Weight:
13 lbs (6 kg)
Start up wind speed:
7 mph (3 m/s)
Voltage:
12, 24 and 48 volts (Inquire for others.)
Output:
400 watts at 28 mph (12.5 m/s)
 Features
BLADES: The AIR's blades are made of a carbon fiber reinforced composite that twists as the turbine reaches its rated output. This twisting effect changes the shape of the blade, causing it to stall, limiting the RPM of the alternator protecting the AIR from damage in high winds.
ALTERNATOR: The AIR's brush-less alternator is optimized to match as close as possible to the cubic energy in the wind. It is constructed with Neodymium Iron Boron permanent magnets for superior performance and maintenance-free operation.
REGULATION & CONTROL ELECTRONICS: The electronics perform several functions to assure maximum output and safety for the user. The control electronics maintain a load on the alternator at all times to insure the turbine never over speeds, regardless of the condition of the battery. As the battery is charged, the sophisticated regulator periodically checks the line, correcting for voltage loss and monitoring charge rate. Once the battery has reached its optimum charge level, the regulator shuts the current off, preventing the battery from being overcharged and slowing the blades to a silent spin.


Features
Unprecedented 3 YEAR WARRANTY
Simple rooftop installation; no tower necessary
Variable pitch Aerolastic carbon matrix blades
Aircraft quality aluminum alloy castings
Exclusive Brush-less neodymium cubic curve alternator
Sophisticated internal battery charge regulator
Safety protection electronics controls voltage and rotor RPM
Maintenance-free - Only two moving parts
Exclusive Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and reducing noise.

 Applications
Remote homes & cabins
Water pumping
Recreational vehicles
Battery charging
Science & education projects


Can be installed on RV!!
AIR 403 - 400W Wind Generator
 Tens of thousands of these turbines are operating around the world, powering remote homes, water pumping, telecommunications stations and sail boats.
The AIR403 is a revolutionary new concept in wind turbine technology. The strong carbon-fiber reinforced blades and advanced airfoil achieve higher output and reduced noise compared to the earlier AIR303 that it replaces. Other improvements include: only two moving parts, maintenance free design, variable pitch airfoil, aluminum alloy aircraft-grade castings with integral heat sink, brushless permanent magnet alternator and improved regulator. Its high power output and maintenance-free reliability make it ideal for use in remote locations. It has a built-in "smart" regulator that can handle peaks of over 750 watts and tapers the charge to trickle and rotor to a silent spin when the batteries are full. AIR's small size and light weight make it easy to mount on pole towers, eliminating the need for sophisticated towers.
The AIR403 is suitable for winds up to 100 mph.

Specifications
Wind Generator Specifications
Rated Power Output
400 watts at 28 mph
Output Voltage(s)
12, 24 or 48 Volts
(not field selectable, specify when ordering)
Rotor & Blade Configuration
3.75 ft diameter rotor, 3 blades
carbon-fiber reinforced
Output Profile vs. Wind Velocity:
8 mph
15 mph
28 mph
38 mph
Output:
0 watts (turbine startup)
75 watts
400 watts
600 watts
Standard Mounting
2 inch schedule 40 pipe
(1-1/2 inch schedule 40 for last 5 ft)
Tower Top Weight
less than 13 lbs
warranty
3 years

      
AIR 403 MARINE
The best selling wind turbine for the sailboat market has been upgraded with a more powerful alternator, new electronics and a more efficient airfoil and is yet again breaking new production records.
Used in numerous single handed B.O.C races, the AIR Marine has been installed on several vessels in the upcoming Millennium race.
AIR marine starts producing power at 6 knots and will produce over 400 watts (28 amps) in a 24-knot wind. The new AIR's output is truly impressive. In only ten knots of wind, the turbine will deliver a consistent 2-3 amps and over 8 amps in only 15 knots. Its lightweight and compact design and integrated electronics make it perfect for sailboats of all sizes.
AIR marine's cast aluminum body and corrosion-resistant powder coated finish offer the cruiser the highest possible quality and reliability in wind turbine design. When taking that next extended voyage, you can be assured the AIR marine will keep your batteries charged.
AIR marine Thousands of satisfied customers now own AIR marines which has made it the best selling wind turbine of all time.
 Features
Unprecedented 3 YEAR WARRANTY
Sophisticated internal charge controller - Externally adjustable for any type of battery
Variable pitch aerolastic carbon matrix blades - Means never having to worry about a runaway wind turbine.
Marine quality powder coated aluminum body for maximum corrosion resistance and durability.
Tin plated wires for maximum corrosion resistance
Anodized hub
Upgraded S.S. fasteners specially treated to minimize galvanic reaction
Brush-less neodymium cubic curve alternator
Safety protection electronics controls voltage and rotor RPM
Operates in hurricane winds without attention
Maintenance-free - Only two moving parts
Auto-brake: Another exclusive feature that automatically slows the AIR to a silent spin when the batteries are charged.
 Specifications

Rotor Diameter:
46" (1.14 meters)
Weight:
13 lbs (6 kg)
Mount:
1.5" (1.9" O.D.) SCD 40 pipe (47 mm O.D.)
Start up wind speed:
6 knots (2.7 m/s)
Voltage:
12, 24 and 48 volts (Inquire for others.)
Output:
400 watts at 24 knots (12.5 m/s)
AIR is the number one selling battery charging wind turbine in the world. AIR brings together advanced brush-less alternator technology, state-of the-art carbon composite rotor blades, and exclusive built-in voltage regulation all in an elegant cast aluminum body.
BLADES: The AIR's blades are made of carbon fiber reinforced composite that twists as the turbine reaches its rated output. This twisting effect changes the shape of the blade, causing it to go into stall mode. This limits the RPM of the alternator, preventing damage in high winds.
ALTERNATOR: The AIR's alternator is optimized to match as close as possible the energy available in the wind. It is constructed with Neodymium Iron Boron permanent magnets and is brush-less for superior performance and maintenance-free operation.
REGULATION & CONTROL ELECTRONICS: The electronics performs several functions to assure maximum output and safety for the user. The control electronics maintains a load on the alternator at all times to make sure that the turbine never over speeds, regardless of the condition of the battery. As the battery is charged, the sophisticated regulator periodically checks the line, correcting for voltage loss and monitoring charge rate. Once the battery has reached its optimum charge level the regulator shuts the current off preventing the battery from being overcharged, then the blades slow to a silent spin, also preserving bearing life. When the batteries again need charging, the turbine?s electronics automatically release the brake and allow the amps to flow!
In just over four years, over 20,000 AIR's have been sold, making it the number one selling turbine in the world. This means that when buying an AIR, your buying confidence.



400W Wind Marine Generator (corrosion-proofed version)
This marine version is the similar to the standard AIR403 except for the added corrosion-proofing. It is designed for coastal and nautical applications where corrosion is a problem. All castings are powder coated and the electronics are fully sealed.
Specifications
Wind Generator Specifications
Rated Power Output
400 watts at 28 mph
Output Voltage(s)
12, 24 or 48 Volts
(not field selectable, specify when ordering)
Rotor & Blade Configuration
3.75 ft diameter rotor, 3 blades
carbon-fiber reinforced
Output Profile vs. Wind Velocity:
8 mph
15 mph
28 mph
38 mph
Output:
0 watts (turbine startup)
75 watts
400 watts
600 watts
Standard Mounting
2 inch schedule 40 pipe
(1-1/2 inch schedule 40 for last 5 ft)
Tower Top Weight
less than 13 lbs
warranty
3 years
     
AIR 403 INDUSTRIAL

Combining wind and photovoltaics in hybrid systems are quickly becoming the standard in renewable energy installations. This is due to seasonal fluctuations of both wind and solar energy resources that make it an ideal combination.
Maintenance-free performance, easy installation, and high output make AIR Industrial ideal for virtually any remote battery charging application. Installations range from Alaska to Antarctica.

Use with the Battery Optimizer and a heating element to increase battery performance during those cold winter months.
 Features
Unprecedented 3 YEAR WARRANTY
Simple installation; no tower is necessary. Can be attached to existing towers.
Variable pitch Aerolastic carbon matrix blades
Aircraft quality aluminum alloy castings
Brush-less neodymium cubic curve alternator
Sophisticated internal battery charge regulator
Safety protection electronics controls voltage and rotor RPM
Maintenance-free - Only two moving parts
Finned aluminum heat sink for maxim cooling effect in high wind average areas
Upgraded electronics and wiring for improved reliability over standard models
Exclusive Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus preserving bearing life.
 AIR Industrial include
Telecommunication sites
Environmental monitoring sites
Offshore platforms
Remote weather stations
Emergency warning devices
 Specifications
Rotor Diameter:
46" (1.14 meters)
Weight:
15 lbs (6 kg)
Start up wind speed:
7 mph (3 m/s)
Voltage:
12, 24 and 48 volts (Inquire for others.)
Output:
300 watts at 28 mph (12.5 m/s)
Without question, AIR has become the number one selling battery charging wind turbine in the world. AIR brings together advanced brush-less alternator technology, state-of the-art carbon composite blades, and exclusive built-in voltage regulation all in an elegant cast aluminum body. Now, AIR Industrial brings a whole new level of sophistication and reliability to wind turbines. Check out these points:
BLADES: The AIR's blades are made of carbon fiber reinforced composite that twists as the turbine reaches its rated output. This twisting effect changes the shape of the blade, causing it to go into stall mode. This limits the RPM of the alternator, preventing damage in high winds. The Carbon-fiber blades are resistant to UV, cold, heat and abrasion. If blades are damaged, replacements can be installed within minutes using two hex wrenches.

ALTERNATOR: The AIR's alternator is optimized to match as close as possible the energy available in the wind. It is constructed with Neodymium Iron Boron permanent magnets and is brush-less for superior performance and maintenance-free operation. The alternator has been strengthened with larger wire to handle anticipated greater amperage production.
REGULATION & CONTROL ELECTRONICS: The electronics performs several functions to assure maximum output and safety for the user. The control electronics maintains a load on the alternator at all times to make sure that the turbine never over speeds, regardless of the condition of the battery. As the battery is charged, the sophisticated regulator periodically checks the line, correcting for voltage loss and monitoring charge rate. Once the battery has reached its optimum charge level, the regulator shuts the current off, preventing the battery from being overcharged and slows the blades to preserve bearing life.
OPTIONAL EXTERNAL REGULATION: With no modifications to the turbine, an external diversion load controller can be added to the system allowing you to make the most of the AIR Industrial's energy production. With a diversion load controller, the excess energy can be diverted to heat a room thus increasing battery efficiency and life.

 The AIR403-INDUSTRIAL is suitable for winds up to 130 mph.
This AIR-INDUSTRIAL is a heavy duty version of the AIR-MARINE. It has been redesigned for use on oil rigs, mountain tops or any other high-wind location. It has specially formulated blade material that can stand up to subzero temperatures and its blades are spaced further from the tower so that it can operate at sustained winds up to 130 mph.
Specifications
Wind Generator Specifications
Rated Power Output
300 watts at 28 mph
Output Voltage(s)
12, 24 or 48 Volts
(not field selectable, specify when ordering)
Rotor & Blade Configuration
3.75 ft diameter rotor, 3 blades
Output Profile vs. Wind Velocity:
8 mph
15 mph
28 mph
38 mph
Output:
0 watts (turbine startup)
-- watts
300 watts
--- watts
Standard Mounting
2 inch schedule 40 pipe
(1-1/2 inch schedule 40 for last 5 ft)
Tower Top Weight
-- lbs
warranty
3 years